SD Card
Revision as of 18:37, 1 August 2020 by NPTracker (talk | contribs) (Created page with "300px|thumb|center|Raspberry Pi with SD Card The Raspberry Pi should work with any compatible SD card, although there are some guidelines that...")
The Raspberry Pi should work with any compatible SD card, although there are some guidelines that should be followed:
SD card size (capacity)
For installation of the NPS-ANPR the minimum card size is 8GB.
Note: Only the Raspberry Pi 3A+, 3B+ and Compute Module 3+ can boot from an SD card larger than 256 GB.
SD card class
The card class determines the sustained write speed for the card; a class 10 should be able to attain 10 MB/s. However, it should be noted that this does not mean a class 10 card will outperform a class 4 card for general usage, because often this write speed is achieved at the cost of read speed and increased seek times.
